Net
Efficiencies
| CENTRAL
HEATING |
|
MODEL
RSF84E (T) |
MODEL
RSF100E (T) |
| OUTPUT
MAX-MIN |
kW |
24.6
- 11.5 |
29.66
- 11.2 |
| ADJUSTABLE |
Btu/oh |
83,900
- 39,250 |
101.220
- 38,220 |
| DOMESTIC
HOT WATER |
|
|
|
| FLOW
RATE RAISED |
30°C
At |
I/min |
10.1
(2.60 gals/min) |
14.2
(3.12 gals/min) |
| |
35°C
At |
I/min |
10.1
(2.22 gals/min) |
12.2
(2.68 gals/min) |
| DOMESTIC
HOT WATER |
|
|
|
| OUTPUT |
kW |
24.6
- 11.5 |
29.66
- 11.22 |
| MAX
- MIN |
Btu/oh |
83,900
- 39,250 |
101.220
- 38.220 |
| EXPANSION
VESSEL |
I |
8 |
8 |
| MAX
CENTRAL HEATING TEMPERATURE |
°C |
85° |
85° |
| CONNECTION |
|
|
|
| HEATING
FLOW & RETURN COMPRESSION |
mm |
22 |
22 |
| GAS
CONNECTION |
mm |
15 |
15 |
| DOMESTIC
SUPPLY (COLD).COMPRESSION |
mm |
15 |
15 |
| DOMESTIC
SUPPLY (HOT) COPPER |
mm |
15 |
15 |
| |
|
|
|
|
WEIGHT |
Kg |
46 |
49 |
| FLUE
SIZE |
mm |
100 |
100 |
| ELECTRICAL
MAINS SUPPLY |
|
|
230v
50hZ |
| SEDBUK |
NAT
GAS |
% |
78.8
BAND D |
78.9
BAND D |
| |
LPG |
% |
81.0
BAND D |
81.2
BAND D |
Flue
Options
Concentric
Flue Duct.
The boiler comes complete with a standard horizontal flue kit
(1 metre long). If required the flue may be extended up to 2.5
metres horizontally. A vertical flue is also available where a
horizontal flue is not possible or desired and can run up to 4
metres vertically in length, by the use of flue extension pipes.
Eccentric
Flue Duct.
This boiler can be used with the eccentric flue system - enabling
flueing up to 29 metres air intake/exhaust from the boiler. A
special two way header can be fitted to the top of the appliance
which guarantees a perfect connection between the boilers sealed
combustion chamber and the two pipes.
| CONCENTRIC |
ECCENTRIC |
1
VERTICAL FLUE TERMINAL
2 90° BOILER FLUE BEND
3 BOILER STRAIGHT FLUE HEADER
4 FLUE EXTENSION (1000mm)
5 EXTERNAL FLUE COLLAR
6 HORIZONTAL FLUE TERMINAL
7 90° IN LINE BEND
8 45° IN LINE BEND
9 FLASHING SLEEVE |
9
FLASHING SLEEVE
10 90° BEND FOR USE WITH
INTAKE AND EXHAUST
11 HORIZONTAL AIR INLET TERMINAL
12 HORIZONTAL FLUE EXHAUST TERMINAL
13 45° BEND FOR USE WITH
INTAKE AND EXHAUST
14 FLUE EXTENSION (1000mm) FOR USE WITH INTAKE AND EXHAUST
15 TWIN FLUE STRAIGHT HEADER
16 VERTICAL TWIN FLUE TERMINAL |
Component List
 |
1
air pressure switch
2 sealed combustion
3 heat exchanger
4 safety thermostat
5 DHW heat exchanger
6 spark electrode
7 modulating gas valve
8 low water cut-off switch
9 DHW thermostat control
10 isolating valve
11 central heating thermostat
12 isolating valve
13 isolating valve
14 safety valve
15 water gauge/thermostat
16 circulation pump
17 shunt valve
18 DHW priority pressure switch
19 burner
20 expansion vessel
21 cut-off thermostat
22 fan
23 automatic air vent
24 concentric bend fitting
25 straight cocentric fitting
26 two-way flue gas header
(for eccentric exhaust connection)
|
